Can't connect to my Duet2 via USB
-
Hello All,
I am trying to connect to a Duet2 I purchased a while back. I connect the USB cable to the board and I get the two red led's for 5+v and the green led for 3.3+v, but I cannot get Yat to connect to the board. I also tried the other program that starts with a P. both say the printer is off line. Reading in your connections help section I believe I am at the point of erasing everything, I juat want to make sure there is nothing left for me to try. The board does not appear in my device manager no matter what I have tried. I have plugged the board into four different USB ports.
-
Make sure the USB cable is a data cable.
Is this what you've been following?
https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7 -
I am good now. I changed out the usb cable and it worked just fine. I thought because I had all the right led's everything else was fine.
-
undefined Phaedrux marked this topic as a question
-
undefined Phaedrux has marked this topic as solved
