Movement width & preset temp
-
PanelDue
Hello,
have a PanelDue 4,3" with V3.
How i can change the movement width?Is There a Posiability to set preset temperatures for the hotend as well for the heated bed as
in DuetWeb?Many thanks in advance
Danijel
-
@topenga said in Movement width & preset temp:
How i can change the movement width?
What do you mean by width?
@topenga said in Movement width & preset temp:
Is There a Posiability to set preset temperatures for the hotend as well for the heated bed as
in DuetWeb?Not exactly. You can use macros to accomplish this.
-
for manuel trevelling via PanelDue there are some Touchkeys to drive the axis's +/- with width or rather travel distance.
How to change the figures for the travel distanc on Touchkeys?Thx
Danijel
-
I don't think that's customizable at the moment. Just the feedrate.
What paneldue firmware are you using?
-
