Duet3 paneldue 7i status changed connecting to printing
-
machine data:
firmware 3.4 beta 7+7
duet 3 v 1.01
firmware 3.4 .0 paneldue 7iI see continuous errors( status changed from connecting to printing) in the console and go away and return icons on the home page
I did the reset of the paneldue checked the cables but nothing
-
Can you show us a screen shot or photo of the errors you're seeing?
-
hello, I attach the photo
continue without stopping
-
Are those messages coming at a steady rate or randomly? Do they match what's happening with the printer itself?
-
they manifest themselves when I launch the print but still the printing proceeds well
-
I can try to install the paneldue firmware again
-
-
very likely something is not working correctly with the communication between RRF and PD. Status connecting is set either on initial connection or connection is lost.
Please check your wiring.
-
ok I make a new wiring for safety and update
-
I'm still testing, for now it seems to me that panel two responds well. I created a new cable to connect duet 3 to I 0.0 to panel two. I reserve the right to update the outcome
