[3.4b7] Total layers in DWC issue
-
Total layer count in DWC appears to be one less than actual. See screenshot. We can provide gCode if needed. The model was 20mm tall with .5mm layer height, so it definitely has 40 layers.
FYI - we are using 6HC and SBCs - not sure if it's related.
-
@oozebot When you print a purge line with e.g. 0.3mm layer height and then the first layer with e.g. 0.2mm layer height, then dwc calculate them as 2 layers.
-
@cosmowave That does not appear related to what we are reporting. We printed a file that has 40 layers. DWC reports it as having 39 total.
-
undefined oozeBot marked this topic as a question
-
Can you share the gcode file?
-
@phaedrux - Here you go. Thanks
-
undefined oozeBot referenced this topic
-
I wonder if it just doesn't catch the first layer change because it doesn't have a leading 0
G1 Z.5 F6000
