M808 Status?

[HebigT]

I'm curious if M808 was ever implemented?

I see some notes about it being planned for rrf 3.3 and only a few other mentions, such as some notes on the RepRap gcode wiki.

https://forum.duet3d.com/topic/21490/feedback-wanted-conditional-gcode-without-indentation

Thanks!

[chrishamm]

@hebigt M808 isn't implemented in RRF, but you could make your own implementation using a custom M808.g macro file, some meta G-code commands, and daemon.g. I for one don't think this should be implemented in RepRapFirmware.

If you need some kind of GOTO, have a look at M26.

[HebigT]

@chrishamm Interesting, thank you for the starting points, I will give this a try.