• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Storing the Z offset value

Scheduled Pinned Locked Moved
Tuning and tweaking
3
5
763
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    DR8
    last edited by 27 Sept 2017, 09:04

    Hi,

    I'm running 1.18 firmware and I'm wondering how can I store the Z offset value. Now I use the Slic3r function to do this but I want to store the value in the firmware. My currently offset value is 1.8 mm

    Thanks!

    P.S. What config.json file is good for? Something bad will happend if I will delete it?

    1 Reply Last reply Reply Quote 0
    • undefined
      Motalw
      last edited by 27 Sept 2017, 09:46

      You can set it with G31 in your config.g
      https://duet3d.com/wiki/G-code#G31:_Set_or_Report_Current_Probe_status

      about the config.json , When using the RRF configuration tool you can create your own individual configuration by creating a new one from scratch or by loading an existing JSON (Config.json) template:

      1 Reply Last reply Reply Quote 0
      • undefined
        DR8
        last edited by 27 Sept 2017, 10:07

        So if I have this:
        G31 P600 X0 Y18.5 Z2.5 ; Set Z probe trigger value, offset and trigger height
        should I change like this?
        G31 P600 X0 Y18.5 Z4.3 ; Set Z probe trigger value, offset and trigger height

        because in the slic3r the Z offset is 1.8mm

        1 Reply Last reply Reply Quote 0
        • undefined
          DR8
          last edited by 27 Sept 2017, 10:56

          so actually it should be
          G31 P600 X0 Y18.5 Z0.7 ; Set Z probe trigger value, offset and trigger height
          and now it works.
          For those who still don't understand read this very helpfull article :
          http://www.sublimelayers.com/2017/05/fdffsd.html

          Topic can be close now. Thanks!

          1 Reply Last reply Reply Quote 0
          • undefined
            stephenc
            last edited by 29 Sept 2017, 17:21

            DR8 do you then set the Z offset to 0 in your slic3r?

            Stephen
            https://github.com/stephenci/ZideX

            1 Reply Last reply Reply Quote 0
            2 out of 5
            • First post
              2/5
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA