M564 S0 H0 not working IN RC1

[moth4017]

this command seems to have stopped working since the update to RC1

M564 S0 H0

[Phaedrux]

Can you give some more details?

[moth4017]

@phaedrux
hi if you send the command in DWC M564 S0 H0 , the move axis buttons within DWC in V3.4.0RC1 are grayed out so you carnt move the motors . the only option available is to "home All"

[dc42]

@moth4017 we are unable to reproduce this, but there was a change made to fix this between beta7 and RC1. Please check that both RRF and DWC (and DSF if you are running in SBC mode) are at RC1.

[moth4017]

@dc42 @dc42 hi My fault the DWC was RC1 but the firmware had not updated from Beta 7