Bondtech LGX how i tune acceloration and jerk?

[jamaicarasta]

Hello guys, i have another question. Installed a new Bondtech LGX extruder. How do you start calibrating an extruder. I'm interested in acceleration and jerk. E steps and retraction are known to me as I set these values.
Thanks in advance

[daveh]

https://www.bondtech.se/product/lgx-large-gears-extruder/ - the initial values are on here see technical specification

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40#s165
Provides a guide on how to do calibration

[jamaicarasta]

@daveh hey thanks, the bondtech webside have already found.
I'll take a look at the other link.