Heater & DHT22 issues after updating to 3.4 firmware

[A Former User]

This post is deleted!

[dc42]

@arnold_r_clark please share your config.g file.

[A Former User]

This post is deleted!

[jay_s_uk]

This post is deleted!

[dc42]

@arnold_r_clark the code has changed in 3.4.0 firmware and DHT11 support has been removed, but DHT22 is working for me on MB6HC spi.cs1:

[A Former User]

This post is deleted!

[dc42]

@arnold_r_clark have you connected a pullup resistor between the DHT22 signal wire and the +3.3V supply to it? I have a 10K resistor connected to mine.

We don't currently support any other humidity sensors, but we may support BME280 in RRF 3.5.

[A Former User]

This post is deleted!

[A Former User]

This post is deleted!

[dc42]

@arnold_r_clark that looks OK so I don't know why it isn't working. Which country are you in?

[A Former User]

This post is deleted!