Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Spurious heater faults

    Scheduled Pinned Locked Moved Unsolved
    Using Duet Controllers
    4
    16
    770
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ibashundefined
      ibash @ibash
      last edited by

      cc @Phaedrux maybe?

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Can you try removing M307 H0 R0.246 K0.112:0.000 D30.62 E1.35 S1.00 B0 ; Bed, with enclosure tuned at 100c from your config.g and re-running the tuning process with M303 H0 S100 and this time take a screen shot of the tuning process after a while so we can see the graph?

        Be sure to start the tuning process from ambient temp.

        Z-Bot CoreXY Build | Thingiverse Profile

        ibashundefined 1 Reply Last reply Reply Quote 0
        • ibashundefined
          ibash @Phaedrux
          last edited by

          Thanks!

          Screen Shot 202z2-04-29 at 12.01.15 AM.png

          Still running the tuner, can post results when done. Just realized that my config.g has "B4240" for the bed thermistor, when I think it should be B3950. Could that be the cause?

          1 Reply Last reply Reply Quote 0
          • ibashundefined
            ibash
            last edited by

            I think the problem is that it is using the wrong thermistor value, as per the graph the keenovo thermistor vs bed thermistor are way different when they should be the same. This is my mistake.

            Thank you Phaedrux!

            1 Reply Last reply Reply Quote 1
            • Phaedruxundefined Phaedrux marked this topic as a question
            • Phaedruxundefined Phaedrux has marked this topic as solved
            • ibashundefined
              ibash
              last edited by

              Hmm, got another heater fault today despite having changed the thermistor value and retuning.

              Screen Shot 2022-04-30 at 5.24.03 PM.png

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by Phaedrux

                Are you copy and pasting the results into your config?
                Have you tried using M500 to save them to config-override.g and then adding M501 to the end of your config to load the values at startup?

                It seems like the values aren't actually applied. Can you send M307 H0 in the gcode console and see what values it is actually using.

                Is it perhaps your part cooling fan coming on and causing the temp to drop? Or is the enclosure temp different during a print versus when it's tuned?

                Z-Bot CoreXY Build | Thingiverse Profile

                ibashundefined 1 Reply Last reply Reply Quote 0
                • ibashundefined
                  ibash @Phaedrux
                  last edited by

                  @phaedrux

                  Yep I do copy/paste the line into config.g. It looks like the values are applied correctly too:

                  In my config.g:
                  Screen Shot 2022-04-30 at 9.49.50 PM.png

                  M307 H0:
                  Screen Shot 2022-04-30 at 9.49.45 PM.png

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    What does the temp graph look like when the error occurs? It seems weird that it expects a rate of 0.28 but actually saw a rate of 0. Is the thermistor not making good contact?

                    Z-Bot CoreXY Build | Thingiverse Profile

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined Phaedrux has marked this topic as unsolved
                    • A Former User?
                      A Former User
                      last edited by A Former User

                      This post is deleted!
                      Phaedruxundefined 1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator @A Former User
                        last edited by

                        @arnold_r_clark said in Spurious heater faults:

                        never reach the same conclusion twice

                        How much variation are you seeing?

                        Z-Bot CoreXY Build | Thingiverse Profile

                        A Former User? 1 Reply Last reply Reply Quote 0
                        • A Former User?
                          A Former User @Phaedrux
                          last edited by

                          This post is deleted!
                          1 Reply Last reply Reply Quote 0
                          • ibashundefined
                            ibash
                            last edited by

                            This post is deleted!
                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Unless otherwise noted, all forum content is licensed under CC-BY-SA