Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    z axis homing fails... it just keeps clicking

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    4
    7
    331
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • The Chairmanundefined
      The Chairman
      last edited by

      X and y home fine. When I home z, Z0 does fine, while Z1 keeps clicking and bouncing.

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @The Chairman
        last edited by

        @the-chairman said in z axis homing fails... it just keeps clicking:

        X and y home fine. When I home z, Z0 does fine, while Z1 keeps clicking and bouncing.

        Please don't overwhelm us with details. 😉

        Please copy-and-paste your config.g file and the various "homing" files - use the </> tag - one tag per file.

        Thanks.

        Frederick

        Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

        The Chairmanundefined 2 Replies Last reply Reply Quote 1
        • The Chairmanundefined
          The Chairman @fcwilt
          last edited by

          @fcwilt Thanks for the input. I tried copying code on my phone yesterday and the forum gave me an error. A friend suggested that I run m119 in the console and it showed the z stop as being off. I looked over the wiring this morning to discover that the z probe cable was plugged into the wrong spot on the Duet. Problem solved.

          I am trying to suss out my Crealty CR Touch, but I'll start another thread on it when I'm ready for input.

          1 Reply Last reply Reply Quote 1
          • The Chairmanundefined
            The Chairman @fcwilt
            last edited by

            @fcwilt I'm having an issue with search on this forum. I'm trying to find how to set up the Crealty CR Touch and not coming up with much.

            Stephen6309undefined dc42undefined 2 Replies Last reply Reply Quote 0
            • Stephen6309undefined
              Stephen6309 @The Chairman
              last edited by

              @the-chairman Got to BLTouch at https://docs.duet3d.com/en/User_manual/Connecting_hardware/Z_probe_connecting Creality has different wiring.

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators @The Chairman
                last edited by dc42

                @the-chairman it looks like it's more or less compatible with BLTouch, see https://www.crealityofficial.co.uk/blogs/buyer_guides/bltouch-vs-cr-touch. If you configure it as for a BLTouch and it still doesn't work, I suggest you create a new thread.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                The Chairmanundefined 1 Reply Last reply Reply Quote 0
                • dc42undefined dc42 marked this topic as a question
                • dc42undefined dc42 has marked this topic as solved
                • The Chairmanundefined
                  The Chairman @dc42
                  last edited by

                  @dc42 Thanks! I am currently getting this error:

                  G32 Error: Probe already triggered before probing move started

                  I'm not even sure I have it wired correctly, but I think I do. 😄 I'll check out that link in a bit and see if I can suss it out from there.

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Unless otherwise noted, all forum content is licensed under CC-BY-SA