Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Loading a file

    Scheduled Pinned Locked Moved
    Duet Web Control
    3
    6
    99
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Nightowlundefined
      Nightowl
      last edited by

      Silly question or I've missed something...

      Where do I load a g-code file into DWC without it starting (which it does, if I use Upload and Start), so I can preview it with the g-code viewer before I run it?

      Thanks

      Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
      I'm still on my learning curve, so take everything I say with caution!

      RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @Nightowl
        last edited by

        @nightowl999 jobs tab and then upload gcode

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        Nightowlundefined 1 Reply Last reply Reply Quote 1
        • Nightowlundefined
          Nightowl @jay_s_uk
          last edited by

          @jay_s_uk

          Hmm, I thought I did that, but nothing showed in the viewer.

          I'll check again, thank you 👍

          Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
          I'm still on my learning curve, so take everything I say with caution!

          RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @Nightowl
            last edited by

            @nightowl999 you may need to hit the up refresh button

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            1 Reply Last reply Reply Quote 1
            • Nightowlundefined
              Nightowl
              last edited by

              Nope, I don't think I've got it!

              I uploaded a toolpath g-code file but I see nothing in the g-code viewer, other than the coloured arrows showing the axes.

              There is a way to review the job in the DWC before starting it, I assume?

              Few things are more dangerous than taking the advice of someone who thinks he knows what he's doing.
              I'm still on my learning curve, so take everything I say with caution!

              RatRig 1075, Duet3 MB6HC, Sorotec SFM 1000 PV-ER milling motor, Hobbyist

              Stephen6309undefined 1 Reply Last reply Reply Quote 0
              • Stephen6309undefined
                Stephen6309 @Nightowl
                last edited by Stephen6309

                @nightowl999 Easiest way: Right click the file for the 3d gcode viewer.

                1 Reply Last reply Reply Quote 1
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA