Declaring variables in config.g

Nightowl

@fcwilt That's really helpful, than you Frederick.

This is how I've declared the variable in config.g:

...
global savedSpindleSpeed = 0
...

and this is how (it's been suggested) I should access it...

...
if state.currentTool >= 0 & tools[state.currentTool].spindle >= 0
	set global.savedSpindleSpeed = tools[state.currentTool].spindleRpm
...

I'm assuming "state.currentTool" is built-in, but there are no squiggly brackets anywhere!

Is that what I'm missing, do you think, as this is on a CNC?

EDIT: I've just noticed "[state.currentTool].spindle >=0," yet the second part shows "tools[state.currentTool].spindleRpm". Should they both be ".spindleRpm"?

OwenD

@nightowl999
Your expressions in your condition should be enclosed in brackets.
As you are using CNC mode, you would need to use curly brackets.

if {state.currentTool >= 0} & {tools[state.currentTool].spindleRpm >= 0}

https://docs.duet3d.com/User_manual/Reference/Gcode_meta_commands#use-of-expressions-within-gcode-commands

Also you are correct, it should be spindleRpm in both instances.
You can check the correct syntax and work out which object model values to use by making use of the object model browser plugin in DWC.

This will let you see the object model and drill down to get the info you need.
If you select a value, the correct path can be copied to the clipboard using the copy button at top right.

Nightowl

@owend So the original line should be changed to this:

if {state.currentTool >= 0} & {tools[state.currentTool].spindleRpm >= 0}
      set {global.savedSpindleSpeed} = {tools[state.currentTool].SpindleRpm}
...

... or should the lower line be enclosed within a single pair of curly parentheses?

As an aside, is "SpindleRPM" the same as "spindlerpm" and SPINDLERPM?

Thanks

OwenD

@nightowl999
No, you only need the curly brackets when doing a comparison using OR or AND
This groups and separates the parts of the equations
You don't need them when setting the value of the variable.

if {global.A = global.B} & {global.B<global.C}
   set global.D = global.B

if {global.A = global.B} || {global.B<global.C}
   set global.D = global.B

You also need them when you must calculate something as part of a standard command such as using a variable in a speed setting

G1 X100 Y100 F{global.D}

OwenD

@nightowl999 said in Declaring variables in config.g:

As an aside, is "SpindleRPM" the same as "spindlerpm" and SPINDLERPM?

No they are not the same.
The object model values and variable names are case sensitive.

Nightowl

@owend Well, I'm definitely missing something, because the resume.g file doesn't restart the spindle, when I expect it should.

This is the declared variable in config.g:

global savedSpindleSpeed = 0

This is my pause.g file:

G1 Z{max(move.axes[2].userPosition+5,move.axes[2].max-5)}			; move the Z axis to a safe height
if {state.currentTool >= 0} & {tools[state.currentTool].spindleRpm >= 0}
	set global.savedSpindleSpeed = tools[state.currentTool].spindleRpm	; save current spindle speed
G1 X273.5 Y560 F2400								; move XY to a safe place
M5										; turn the spindle off
echo "Spindle speed saved at", global.savedSpindleSpeed, "RPM"			; spindle speed saved

...and this my resume.g:

if {state.currentTool >= 0} & {tools[state.currentTool].spindleRpm >= 0}
	M3 S{global.savedSpindleSpeed}	; resume saved spindle speed
G4 S1					; wait 1 second to allow the spindle to spin up
echo "Spindle speed resumed at ", global.savedSpindleSpeed, "RPM"
G1 R1 X0 Y0 F2400			; go above the paused XY position

This should be easy with all the help I've had, but what have I missed..?

OwenD

@nightowl999 said in Declaring variables in config.g:

Can you try this to ensure that the condition is being met.

if {state.currentTool >= 0} & {tools[state.currentTool].spindleRpm >= 0}
       M3 S{global.savedSpindleSpeed}	; resume saved spindle speed
       G4 S1					; wait 1 second to allow the spindle to spin up
       echo "Spindle speed resumed at ", global.savedSpindleSpeed, "RPM"
       G1 R1 X0 Y0 F2400	
else
       echo "condition not met.  Spindle speed remains at " ^ tools[state.currentTool].spindleRpm ^  "RPM"

Nightowl

I can, @owend, but running pause.g indicates the spindle speed of 0RPM is saved, not the 18,000RPM it's running at, so it seems to be an issue with pause.g?

Nightowl

@OwenD here we are, the text from the Console:

27/05/2022, 19:43:24 	M0
Printing paused at X128.8 Y168.9 Z64.0
Cancelled printing file 0:/gcodes/Calibration Toolpath.gcode, print time was 0h 0m
27/05/2022, 19:43:12 	Spindle speed saved at 0 RPM
27/05/2022, 19:43:10 	M25
Resume state saved
27/05/2022, 19:43:08 	Printing resumed
27/05/2022, 19:42:56 	M24
Error: in file macro line 14 column 63: meta command: array index out of bounds
27/05/2022, 19:42:52 	Printing paused at X125.6 Y125.8 Z65.0
27/05/2022, 19:42:40 	Spindle speed saved at 0 RPM
27/05/2022, 19:42:37 	M25
Resume state saved
27/05/2022, 19:42:29 	M32 "0:/gcodes/Calibration Toolpath.gcode"
File 0:/gcodes/Calibration Toolpath.gcode selected for printing
27/05/2022, 19:42:16 	File 0:/gcodes/Calibration Toolpath.gcode will print in 0h 3m plus heating time
27/05/2022, 19:42:15 	M37 P"0:/gcodes/Calibration Toolpath.gcode"
Simulating print of file 0:/gcodes/Calibration Toolpath.gcode
27/05/2022, 19:42:04 	G10 L20 P1
Origin of workplace 1: X97.00 Y94.00 Z67.00
27/05/2022, 19:41:37 	g1 x147
27/05/2022, 19:41:20 	g1 y84
27/05/2022, 19:41:06 	g1 y660
27/05/2022, 19:40:34 	Connected to weeble

OwenD

@nightowl999 said in Declaring variables in config.g:

Error: in file macro line 14 column 63: meta command: array index out of bounds

This will be the problem.
See the other thread.

Nightowl

@owend

This is Line 14 from resume.g...

   echo "condition not met.  Spindle speed remains at " ^ tools[state.currentTool].spindleRpm ^ "RPM"

with the same error when I changed it to:

   echo "condition not met.  Spindle speed remains at ", tools[state.currentTool].spindleRpm, "RPM"

OwenD

@nightowl999
See the other thread.
I suspect you have no tool defined when the resume starts.