Can not see files on my panel due i7, duet 3
-
I need to start a print off line but I can not view any files on the Panel Due. I have had it for a year and everything else works, I can see when a print is going, warm up the hot end, ect but I can not start prints. The SD card icon says zero files. I have the 4 pin connector hooked up. I don't care how I just need to be able to start a print off line.
-
It would help to know your firmware versions on the Duet and the PanleDue.
-
@phaedrux panel due is 1.23.2 and duet 3 is 3.1.1 I think
-
I think you'll need to update the panel for firmware to at least 1.25
-
@phaedrux how do I do that? Can I do it from the web interface?
-
You'll need to use USB from a PC and bossa software to flash it.
https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue
Ideally you should update both your paneldue and duet as they are both quite out of date. But I think getting the panel to at least 1.25 should get it working fully with rrf3
-
@phaedrux oh gezz okay that's a tomorrow problem I'll update you tomorrow. Thank you!
-
@corvodewittv2 Well I tried updating my firmware and now my screen is just a backlight. How do I know I have the right version.
-
@phaedrux Replied to myself please see last post
-
@phaedrux Found the right one but it doesn't seem to display all my print files?
-
Does it display any files?
What firmware version did you land on?
How many files do you have?
