Unable to get on DWC
-
I have been happily connected for 24 hours and not i cannot get on the Duet Web Control
I am connected to WIFI and can see the screen in the background but i am getting a blue screen saying connecting and at the bottom the following message
Failed to connect - incompatible firewareI just wanted to check it would be the Duet that needs firmware updating? I am running version 2.03 currently
What i dont understand is why did it work yesterday and not today? -
@darbyad85 did you update anything yesterday?
-
@jay_s_uk I've updated the firmware and it doesn't seem to have solved the problem. M552 61 is confirming I am connected and the right IP address for DWC but all I get is a blue bar saying 'Connecting...' with no connection
-
@darbyad85 did you update DWC at the same time? thats probably the issue
-
I updated the wifi and rap/rep at the same time, is there also an update for the DWC
I was on version 2.03 but used the Duet 2 and 3 firmware 3.0 as advised - is there something else i have missed?Thanks
-
@darbyad85 do you know what firmware version you ended up with? Was it RRF 3.0 or 3.4.1?
-
I have 3.0 i didnt upgrade to 3.4.1
I have found the DWC zip file that is part of 3.0 - can i just install the same way i did to get to version 3.0 or do i delete and install all together? -
@darbyad85 you can just delete the contents of the www folder and replace it with the contents of the dwc zip file
-
thank you, do I need to perform M997 S0?
-
@darbyad85 no, DWC files are just held on the SD card. that should get you up and running
-
thanks so much - I am indeed up and running!
-
Now that you're at 3.0 you should probably update to 3.4.1
3.0 was a very early release, much has changed.
Updating now is as simple as uploading a single zip file to the system tab in DWC. Do not decompress it first.
https://github.com/Duet3D/RepRapFirmware/releases/download/3.4.1/Duet2and3Firmware-3.4.1.zip
And if you're coming from 2.03 you should probably generate a new config file set.
