I could use some help

A Former User

@fcwilt so you write the code, but you don't put the line numbers in; that's what the program you write the code in does?

And the === before what you wrote, and the === after what you wrote create the idea of a "Header?"

fcwilt

@mac said in I could use some help:

@fcwilt so you write the code, but you don't put the line numbers in; that's what the program you write the code in does?

And the === before what you wrote, and the === after what you wrote create the idea of a "Header?"

The part at the top of the file is the "header"

The part at the bottom of the file is the "footer"

I actually put more than I posted into the header and footer - I was just posting a simple example.

Frederick

A Former User

@fcwilt link text

Here’s a link to the video of Z’s first attempt at homing.

A Former User

@fcwilt Z's going backwards. When I click on Z+0.5 it goes DOWN.

droftarts

@mac @fcwilt you had the z probe working. Using an endstop on the low end is a retrograde step.

Ian

A Former User

@droftarts hey, Ian, welcome to the show, what is a "retrograde step?"

fcwilt

@droftarts said in I could use some help:

@mac @fcwilt you had the z probe working. Using an endstop on the low end is a retrograde step.

Ian

In your opinion. I see it as a distinct improvement.

X and Y can be homed with no Z movement required.

And generally Z homing can be faster.

But that is just my opinion.

Frederick

A Former User

@fcwilt @droftarts oh my god! what have I gotten myself between and betwixtd?

fcwilt

@mac said in I could use some help:

@fcwilt Z's going backwards. When I click on Z+0.5 it goes DOWN.

Then adjust the M569 for that Z drive and change it from normal to reverse or reverse to normal - the opposite of what it is now.

Re-boot and re-test.

Frederick

A Former User

@fcwilt

M569 P0.3 S1                                       ; physical drive 0.3 goes forwards

A Former User

@fcwilt so I'm thinking I should change the S1 to S0? (I don't know that 0 means reverse, or the opposite of, I'm just surmising that's what I should do).

fcwilt

@mac said in I could use some help:

@fcwilt

M569 P0.3 S1                                       ; physical drive 0.3 goes forwards

So you don't know what to change?

OK here you go:

The P specifies the driver number which you have as 0.3 which sounds fine.

The S specifies the direction with S1 being normal and S0 being reverse.

Don't get hung up on normal and reverse - there really is no standard for what rotation is considered normal and what is considered reverse.

So since you have S1 change it to S0, re-boot and re-test.

Frederick

A Former User

@fcwilt nice to have that fan stop rattling away. I'm glad I figured that out, and thank you for the additional information. I was thinking of that song, One way, and another, when I read about there being no "normal and reverse."

droftarts

@fcwilt look at his bed. It’s not 10mm cast aluminium plate, well-constrained and moving on linear rails. It’s a (please forgive me, @Mac ) cheap bedslinger setup. He’s going to need mesh compensation to have half a chance getting the first layer to stick. The probe was working fine. Fiddling around with a Z min endstop is excruciating with flimsy beds.

Doing kids bath and bed. Not around for a while.

Ian

A Former User

@droftarts @fcwilt

M569 P0.3 S0                                       ; physical drive 0.3 goes forwards

Why is it never easy?

A Former User

@droftarts kids need their Dad, I had 3 (they're all adults now, although the oldest is living with us currently). Thank you for being so helpful Ian!

A Former User

@fcwilt are we okay even though the code still says "forwards?"

fcwilt

@mac said in I could use some help:

@fcwilt are we okay even though the code still says "forwards?"

Everything after the ; character is just a comment - it affects nothing - you could put a line from a Shakespeare play there and it would make no difference at all.

All that matters is you find the right S parameter so the Z axis moves in the correct direction.

And the same is true for X and Y - if it turns out they are not moving in the correct direction.

Frederick

fcwilt

@droftarts said in I could use some help:

@fcwilt look at his bed. It’s not 10mm cast aluminium plate, well-constrained and moving on linear rails. It’s a (please forgive me, @Mac ) cheap bedslinger setup. He’s going to need mesh compensation to have half a chance getting the first layer to stick. The probe was working fine. Fiddling around with a Z min endstop is excruciating with flimsy beds.

Doing kids bath and bed. Not around for a while.

Ian

Rest assured Mesh Bed Compensation will be implemented.

One small step at a time.

Frederick

A Former User

@fcwilt got it, I've offended you. Please accept my apologies. I've spent 70 years making life miserable for others. It's hard to get out of that habit.