• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

usb dwc

Scheduled Pinned Locked Moved
Using Duet Controllers
3
6
274
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    oolyk
    last edited by 16 Jul 2022, 12:50

    I cannot connect to the wifi in my duet2 wifi. noticed moderator's remark:
    "You can run the Duet via USB too if you want, but you will lose the power of the web interface"
    kindly explain how. thanks!

    undefined 1 Reply Last reply 16 Jul 2022, 12:56 Reply Quote 0
    • undefined
      dc42 administrators @oolyk
      last edited by 16 Jul 2022, 12:56

      @oolyk see https://docs.duet3d.com/How_to_guides/Getting_connected/Getting_connected_to_your_Duet for how to get started using USB. Once you have a working USB connection, you should find it easier to get the network connection working.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      undefined 1 Reply Last reply 17 Jul 2022, 15:03 Reply Quote 0
      • undefined
        oolyk @dc42
        last edited by 17 Jul 2022, 15:03

        @dc42 , thanks.
        I am totally stuck. my paneldue turned dead a year ago and I have since been using wifi dwc but now wifi disappeared as well. cannot manage to have the network being recognized.
        what can I do under these conditions to find the problem of the paneldue ?

        thanks.

        1 Reply Last reply Reply Quote 0
        • undefined
          Phaedrux Moderator
          last edited by 18 Jul 2022, 04:05

          For the PanelDue try updating the firmware
          https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue

          For the loss of wifi, follow the link posted above by DC42 on how to get connected to your duet. It goes through using a USB connection and terminal software to send commands to the Duet. If that doesn't work, I suggest you look at this link and let us know how far you get in testing it.

          https://docs.duet3d.com/en/User_manual/Troubleshooting/Duet_wont_respond

          Z-Bot CoreXY Build | Thingiverse Profile

          undefined 1 Reply Last reply 18 Jul 2022, 07:28 Reply Quote 0
          • undefined
            oolyk @Phaedrux
            last edited by 18 Jul 2022, 07:28

            @phaedrux. thanks.
            I am trying to follow "activate and connect......when it doesn't work"
            I check the sd card in the computer and it has all the files, including SetNetwork. however, when I command m98P/macros/SetNetwork, it comes back with "could not find..." . tried other macros files with same results. how can I check the card thru YAT?

            undefined 1 Reply Last reply 18 Jul 2022, 18:04 Reply Quote 0
            • undefined
              Phaedrux Moderator @oolyk
              last edited by 18 Jul 2022, 18:04

              @oolyk said in usb dwc:

              how can I check the card thru YAT?

              Well it sounds like it is responding to commands over YAT. Can you send M122 and copy paste the results here? Be sure that your line endings have been set correctly in YAT so that we can get the full report.

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              1 out of 6
              • First post
                1/6
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA