New Toolboard Timeout

kingofthegeeks · 23 Jul 2022, 23:57

After changing out a working toolboard for a newer version I'm having some trouble getting comms, the new toolboard does the customary fast flash then slows down once connected to main board on CAN.

That's where it breaks down, after one to 5 slow flashes it stops flashing and throws :

Error: M115: Response timeout: CAN addr 121, req type 6024, RID=15

I'm about fed up with this specific toolboard as I can put in the old one and it connects properly, the same for an old v1.0 in this machine.

latest firmware, thoughts or troubleshooting steps, i can never communicate with the new toolbard or get any reports from it ?

Mike

Phaedrux · 24 Jul 2022, 18:42

Since this is a new board perhaps something has been missed from commissioning.

Have you reviewed this? https://docs.duet3d.com/en/Duet3D_hardware/Duet_3_family/Duet_3_Toolboard_1LC#commissioning

kingofthegeeks · 25 Jul 2022, 19:15

@phaedrux I am unaware what changed but the next morning and ever since it has been operating as expected. Confused but moving on, thanks for the response.

Mike