Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    he MCU temperature is specified with negative values

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    2
    4
    131
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • axiomundefined
      axiom
      last edited by

      My board gets 24 V in (just measured again) but only 17 V is displayed in the console. In addition, the MCU temperature is specified with negative values. What can be the reason?

      axiomundefined 1 Reply Last reply Reply Quote 0
      • axiomundefined
        axiom @axiom
        last edited by

        @axiom when i unplug the display..the display is quite normal

        1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators
          last edited by

          @axiom I think you have plugged the display into the wrong 10-way ribbon cable connector. On the Duet 2 it should be in CONN_SD.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          axiomundefined 1 Reply Last reply Reply Quote 0
          • axiomundefined
            axiom @dc42
            last edited by

            @dc42 Well, "if you can read, you have a clear advantage" (German saying).... i was stupid... thanks, that was the solution!

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined Phaedrux marked this topic as a question
            • Phaedruxundefined Phaedrux has marked this topic as solved
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA