Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Wiring tool distribution board

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    164
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • TRATOONundefined
      TRATOON
      last edited by TRATOON

      Hello I am confused on how to bring power to the tool distribution board. Does the power come from out0 in the barrier strip from duet 3 or does power come from psu. If it comes from psu, can I use out0 instead, since it is unused (I am using the mosfet that came with my ender 5 plus) and all the outputs on psu are full?

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @TRATOON
        last edited by jay_s_uk

        @tratoon ideally it should come from your PSU. I wouldn't be using out0 as it won't be powered at boot and this could lead to CAN connection issues. You can always connect more than one thing to the PSU outputs

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        TRATOONundefined 1 Reply Last reply Reply Quote 1
        • TRATOONundefined
          TRATOON @jay_s_uk
          last edited by

          @jay_s_uk ok

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA