Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    duet3 mini5 stuck

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    2
    3
    127
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • wally3Dundefined
      wally3D
      last edited by

      Board v0.5

      Seems to no longer boot completely. When connected via USB to a windows machine it does not appear in the Device Manager. I have a steady green and red LED when connected to the PC. Confirmed USB cable is OK.

      When connected to 24V the behavior is the same, with the blue and amber LED's lit as well.

      The SBC will not connect to the board as well.

      I do not know if there is a way to "erase" the firmware as stated here: https://docs.duet3d.com/User_manual/Troubleshooting/Duet_wont_respond

      Any help would be appreciated.

      Phaedruxundefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator @wally3D
        last edited by

        @wally3d said in duet3 mini5 stuck:

        I do not know if there is a way to "erase" the firmware

        Yes there is.

        https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_firmware#duet-3-mini-5-wifiethernet

        Z-Bot CoreXY Build | Thingiverse Profile

        wally3Dundefined 1 Reply Last reply Reply Quote 0
        • wally3Dundefined
          wally3D @Phaedrux
          last edited by

          @phaedrux Thanks, that did the trick.

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined Phaedrux marked this topic as a question
          • Phaedruxundefined Phaedrux has marked this topic as solved
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA