Pause Message

[that guy E]

After a pause trigger has occurred, I will continue to receive a pause message that I need to acknowledge every time I connect to DWC until the controller has been reset. Is this an big in DWC or is there an additional acknowledgment I need send in resume command.

RRF 3.4.1 rc1

[Phaedrux]

What is in your pause.g?
What does the message look like?
Can you update to 3.4.2 RC3?

https://github.com/Duet3D/RepRapFirmware/releases/tag/3.4.2rc3%2B

[jay_s_uk]

@phaedrux it's more than likely the same thing I raised here which hasn't been addressed https://forum.duet3d.com/topic/28788/event-notifications-not-dismissing-on-multiple-clients

[that guy E]

@phaedrux

I'll try the newest release when I get a minute tomorrow.

Message

Pause.g

M83            ; relative extruder moves
G1 Z{move.axes[2].machinePosition+10} E-4 F60000
G1 X10 Y10 E-4 F60000

[that guy E]

@phaedrux

Been a while, but I finally got about to trying 3.4.2 and the pause message still continues to show every time you reconnect.

[dc42]

@jay_s_uk said in Pause Message:

@phaedrux it's more than likely the same thing I raised here which hasn't been addressed https://forum.duet3d.com/topic/28788/event-notifications-not-dismissing-on-multiple-clients

It's addressed in RRF and DWC 2.5 3.5.

[Phaedrux]

@dc42 3.5?

[that guy E]

@phaedrux @jay_s_uk

To confirm should 3.4.3 address this or will it be addressed in upcoming 3.5?

3.4.3 does not seem to address the issue and I'm actually having trouble reconnecting to the printer mid print. I'm running into a continually loading white page.

[jay_s_uk]

@that-guy-e it'll be addressed in 3.5
The message boxes have been written to improve them and offer more options

[that guy E]

@jay_s_uk

Thanks for the clarification.