Finish step fails for Reprap Fisher

[fotomas]

Went trough all steps wit default settings except these settings:

Start
RepRapPro Fisher
General
Board: Duet2WiFi
Firmware Version: 3.3 or later (stable)
Network
WiFi Access Point Name ...
WiFi Password ...
Finish
Unchecked DWC firmware and latest stable firmware

Error in browser console:
vue.runtime.esm.js:3020

TypeError: Cannot read properties of null (reading 'output_pin')
    at Template.js:410:37
    at Array.forEach (<anonymous>)
    at Object.validatePins (Template.js:409:20)
    at a.goToNextPage (App.vue:182:1)
    at click (App.vue:1:2431)
    at Ln (vue.runtime.esm.js:2988:30)
    at n (vue.runtime.esm.js:1786:20)
    at link.js:181:19
    at Array.forEach (<anonymous>)
    at a.onClick (link.js:180:12)

[droftarts]

@fotomas What version of RRF did you update from? Did you update DWC as well? Generally, you need to run the same version of DWC as RRF. There's also not much reason to run RRF 3.3; update to the latest, ie v3.4.3. Then follow the instructions here, or adapt them for 3.3 if you want to run that: https://forum.duet3d.com/post/296989

Ian

[fotomas]

@droftarts I think you misunderstood. This is regarding the configtool, in the configuration tool forum.

/Tomas

[droftarts]

@fotomas Oops, sorry! One for @chrishamm

Ian

[droftarts]

@fotomas I think it's to do with the Z endstop. For some reason can't select 'Switch'.
Edit: ... and the I/O mapping page isn't showing up correctly. I think there's an incompatibility in the Fisher config template.

Ian