IR Probe Mount for updated E3D v6

[McAdam]

I made an IR Probe mount for the updated E3D v6 because most of the ones currently available will not fit, or have some design element to them that I did not like.

This one is designed to mount and give a Y offset of 16mm with 0 X axis offset.

Printed, and tested.

Hope it helps someone.

https://www.thingiverse.com/thing:2598767

[JohnOCFII]

Very nice!

[GeckoBox3D]

Nice mount.

I'm also glad to know I'm not the only one who has resorted to bodge fixing the E3D sock to my hotend! I use a thin strip of kapton tape but it was a PITA to get on…..