External triggers not operating as expected

[A Former User]

This post is deleted!

[jay_s_uk]

@Herve_Smith said in External triggers not operating as expected:

M950 J1 C"io3.in" ; Input 1 uses io3.in pinM581 P1 S1 T3 R0 ; invoke trigger3.g 950 J2 C"io4.in" ; Input 2 uses io4.in pinM581 P1 S1 T4 R0 ; invoke trigger4.g

your config is wrong
you're missing an M on the second M950
The P value used in M581 should correspond to the J value used in M950
You should also used Normally Closed switches to prevent noise being an issue

[A Former User]

This post is deleted!