choosing motor with low vibration for ender 3
-
Hi all
I Have ender 5 with original motors but I am struggling with vibration
on x and y axis
I am using Duet WiFi with TMC 2660
all my effort to reduce the vibration are leading to the motors
this is not a belt or pulley issues or extruder motor only x and y motors
I already search in the net and special on this forum
the Y motor is dual shaftI need you to help me find a good motors that are working well with TMC 2660 drivers
Thank you -
What kind of vibrations are you seeing/hearing? Is it just noisy, or are you seeing print artifacts?
I think these would pair well with the Duetwifi on an ender3.
-
@Phaedrux
they are vertical line without relation to any shape
if print XYZ calibration cube there is no ringing to Y axis
only vertical lines same spot same amount
-
-
I can't make out much from that photo.
-
@moris Have you considered motor dampers? They helped quite my machine, not sure if they improved print quality at all.
Also, if you have your current settings wrong that might be an issue too. I had to tweak mine several times to find the right values.
-
@wwak84
I try everything in the web
Frame and motors the only thing I did it change -
@moris please post your config.g file so that we can check what settings you are using.
