• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

BLV MGN Cube - Bulging corners

Scheduled Pinned Locked Moved
General Discussion
3
3
215
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    manne_sahne
    last edited by manne_sahne 22 Dec 2022, 12:55

    I have issues to get accurate corners, even if I activate pressure advance (RRF 3.4.0). The first cube is without pressure advance, the second with activated pressure advance. My printer has the classic setup with bowden extruder.

    Screenshot 2022-12-22 114529.jpg
    Screenshot 2022-12-22 114443.jpg
    IMG_5893.JPG
    IMG_5892.JPG
    Screenshot 2022-12-22 122806.jpg
    Screenshot 2022-12-22 122447.jpg

    undefined 1 Reply Last reply 22 Dec 2022, 14:32 Reply Quote 0
    • undefined
      infiniteloop @manne_sahne
      last edited by 22 Dec 2022, 14:32

      @manne_sahne

      I have issues to get accurate corners, even if I activate pressure advance (RRF 3.4.0).

      Without PA, the result looks better.

      My printer has the classic setup with bowden extruder.

      This doesn’t tell us how "classic" your printer really is. Depending on the mechanics, your speed and acceleration settings can be way too high. How does a cube look at max. print speed of 30 mm/s (without PA)?

      To try that, set "Maximaler Vorschub" to 30 and "Maximale Beschleunigung" to 100 in your slicer. I'm curious to see what kind of cube you get with these settings 🤓

      undefined 1 Reply Last reply 22 Dec 2022, 16:25 Reply Quote 0
      • undefined
        RogerPodacter @infiniteloop
        last edited by 22 Dec 2022, 16:25

        my prints also have bulging corners which has been present for a few months. I followed the other topic thread about pressure advance issues which has many responses and discussion but no definitive resolution. I have luck by printing much faster than i normally would and the corners are better.

        1 Reply Last reply Reply Quote 0
        2 out of 3
        • First post
          2/3
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA