Gcode upload problem on linux
-
I cannot reliably upload a g-code file via DWC on a Linux Mint 21 machine. It starts and after proceeding for a while the connection goes down and upload fails. The printers have Duet 6HC boards with 3.4 firmware. Uploading from W10K works normally, only on Mint it fails, I tried Firefox and Brave, same result, no matter what connection settings are in the DWC. Perhaps there are some networking settings I don't know about. Did you have any problems alike?
-
Wired or wireless?
-
@Phaedrux
Always wired.