M144 behave like M568
-
Hello,
I would like to see M144 to behave similarly to M568, where 0 is off, 1 is standby, and 2 is active. Alternatively, just allow an active and off state, and ditch the standby state, as dc42 mentioned here: https://forum.duet3d.com/post/268960
It just seems like it should be good practice to control all heating elements in the same way and unify the way they are controlled, instead of having one type of heater be controlled by states (M568), and another type of heater be controlled by temperature values (M144 S-273.1).
