Cant print taller than 200mm

[nick9one1]

I've tried to print this part twice and my printer seems to stop at 200mm and not print that last 13mm.

The Gcode file seems to be correct, and I cant find anything in config.g that creates a limit. The max print height in superslicer was 300mm - I've changed this to 600mm.

config.g

Powerful Hillar-Densor.stl

[droftarts]

@nick9one1

 Axis Limits
M208 X-3:305 Y0:305   							 ; set axis limits

You haven’t set axis limits for Z, so it’s probably using the default. I think you can send M208 to see the current setting. Add values for Z.

Ian

[nick9one1]

@droftarts said in Cant print taller than 200mm:

M208

spot on. Thank you!