S3D tool change script - IdeX

[stephenc]

hello,

I've read through https://www.duet3d.com/wiki/Configuring_multiple_independent_X-carriages_on_a_Cartesian_printer
and have perhaps too basic question…. on how do I actually include the tfreeXX.g, tpreXX.g, and tpostXX.g inside S3D tool change script?

do I keep the {IF NEWTOOL=0} and {IF NEWTOOL=1} in there?

thanks,
Stephen

[dc42]

You don't. Those files live on the SD card in the Duet and are called by the firmware automatically when you do a tool change.

[stephenc]

So those get calls from firmware automatically it sees T0 or T1 in gcode?

[dc42]

Yes. Unless you use the P parameter on the T command to select which ones you do/don't want to run.

[jakemestre]

This is beautiful David! Very nice feature to round out the functionality of your boards.

[dc42]

Thanks; but it was Adrian Bowyer who designed that feature and did the initial implementation, not me.