Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Problem with Panel DUE

    Scheduled Pinned Locked Moved Solved
    PanelDue
    2
    10
    382
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Makergal3Dundefined
      Makergal3D
      last edited by

      I'm back with this problem, at first my panel due was working fine. I don't know when but suddendly it start to say connecting.
      I try to update de firmare, install the old cable, the one it came with the Panel Due, I made a new one guiding myself for the one that came with the duet. But its imposible to get connection between the duet and the board.

      In the config.g and in the panel it self I have the baudrate set to 57600

      Just figure out something now, the panel due connect only if I home XYZ other wise will not show info in the screen.
      In the config is on the very top of the file just in case.

      Thanks in advance

      1 Reply Last reply Reply Quote 0
      • Makergal3Dundefined
        Makergal3D @Makergal3D
        last edited by Makergal3D

        @Makergal3D I think the ribbon cable was not properly attach to the panel due 🤦

        You can close it

        Sorry

        1 Reply Last reply Reply Quote 1
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          What firmware version on the PanelDue and Duet?
          Which Duet board?
          How do you have it wired? ribbon or 4 wire?
          Does the wiring run near motor or endstop cables?

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • Makergal3Dundefined
            Makergal3D
            last edited by

            I just install today the last version avaliable in github.
            I got a duet 6xd
            Ribbon cable
            And about the placement I try to moved away from other cables, but is the same only show things if I make homing, without homing no info in the screen

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              So duet firmware 3.4.6 and paneldue 3.5 rc3?

              Have you tried using the 4wire cable option?

              https://docs.duet3d.com/en/User_manual/Connecting_hardware/Display_PanelDue

              Z-Bot CoreXY Build | Thingiverse Profile

              Makergal3Dundefined 1 Reply Last reply Reply Quote 0
              • Makergal3Dundefined
                Makergal3D @Phaedrux
                last edited by

                @Phaedrux the RC6 for the panel Due, but yes, both updated to the lasts firmwares.

                I didn't try to connect with the other method, but the weird thing to me, is that shows info only after homing, previous to homing no data in the screen

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  Can you test by disconnecting the endstops entirely and see if it works correctly?

                  Z-Bot CoreXY Build | Thingiverse Profile

                  Makergal3Dundefined 1 Reply Last reply Reply Quote 0
                  • Makergal3Dundefined
                    Makergal3D @Phaedrux
                    last edited by Makergal3D

                    @Phaedrux disconecting the enstop didn,t work. If I connect the screen with the 4 cables, I need to add something to the config I suppose, right??

                    If there is nothing to config, with the 4 cables doesn't work either

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      Which Duet board are you using?

                      Did you review the connection guide?

                      https://docs.duet3d.com/en/User_manual/Connecting_hardware/Display_PanelDue

                      Z-Bot CoreXY Build | Thingiverse Profile

                      Makergal3Dundefined 1 Reply Last reply Reply Quote 0
                      • Makergal3Dundefined
                        Makergal3D @Phaedrux
                        last edited by Makergal3D

                        @Phaedrux I'm using a Duet 3 6XD and a 1 XD expansion board.
                        Yes of course I did read the user manual. But I can not make the screen to work properly.

                        As I said with the ribbon cable doesn't show info.
                        With the 4 cable connector also not info.
                        With the original cable the panel due came in, nothing either.

                        I don't know what else to do. But the screen is not working, and from time to time it start working.
                        I though it was after homing but further testing shows that is not related with the homing

                        Makergal3Dundefined 1 Reply Last reply Reply Quote 0
                        • Makergal3Dundefined
                          Makergal3D @Makergal3D
                          last edited by Makergal3D

                          @Makergal3D I think the ribbon cable was not properly attach to the panel due 🤦

                          You can close it

                          Sorry

                          1 Reply Last reply Reply Quote 1
                          • droftartsundefined droftarts marked this topic as a question
                          • droftartsundefined droftarts has marked this topic as solved
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA