New ConfigTool v3.5.0-beta.3 available

matej1006

Duet 3 Expansion 1HCL allows to add just one temp0 and not temp1

matej1006

BL TOUCH isn't possible if i select like that

St Taw

Typing in values for X or Y causes 'Enable Mesh Bed Compensation to be turned off"

Using Firefox

St Taw

Few more observations

Cannot define PWM Port for more than Fan#2 e.g. Duex.fan3 etc

Cannot define extruder drives D1, D2, D3

chrishamm

@matej1006 @St-Taw Thanks for your feedback! Those issues have been fixed in v3.5.0-beta.2.

Selecting different axes for mesh bed compensation works fine on my setup. Also, it is possible to add extruders to tools if they're defined before.

marvineer

please leave some feedback here.

I had a quick try and noticed that the new pin name led is missing:

And thanks for the dark mode btw, even if my screenshot doesn't appreciate it

chrishamm

@marvineer Thanks, now added.

genialePrutser

I'm trying to configure a hangprinter with only the A,B and C anchors, so it can move an object across a 2D plane (the floor).

I can't disable the D anchor. Is this a limitation of the configuration tool, or a limitation of the RepRapFirmware?

chrishamm

@genialePrutser It's a limitation in RRF and the ConfigTool reflects this. See my other reply as well.

nikscha

Two things I'd like to be improved:

The configurator looks a bit cluttered and dense, I think it would be more readable with more whitespace between the individual sections
Currently it's not possible to set mixxing ratios for a tool with more than one extruder

A Former User

This post is deleted!