Faulty 1LC 1.3, no CAN communication
-
Hi, I was fitting my printer with a new 6XD, distribution board, and 2 tool boards, and one of the tool boards was blinking slowly as expected and the other was blinking quickly. I swapped the cables around and which port on the distribution board they were plugged into to see if one of them was bad but it did not resolve the issue. I had a spare 1LC from a different printer and plugged that in and it worked correctly, and that is what's currently fitted on the printer. The one I believe to be faulty is serial 202305-085. Thanks.
-
@strohm81 can you send a high res picture of the board please
-
Sure thing. Let me know if you need anything else.
-
undefined Phaedrux marked this topic as a question
-
@strohm81 please will you send an email to warranty@duet3d.com, referencing this thread, and we will arrange a replacement through your original reseller.
-
Great. Thanks!
