Looking for particular documentation ( I cant find it)
-
@Herve_Smith you could use sensorless homing on z and then save the z offset into the config.g but this would depend on how good your Z sensorless homing was . then could you trust it? if there was a bit of filament left on the end of the nozzle it could throw it all out .
-
This post is deleted! -
The troodon v2 comes with such an arrangement, and team gloomy provides an auto z trigger height macro at
https://github.com/TeamGloomy/Troodon-V2/tree/improved/Config/macros
maybe that's what you are looking for?
-
This post is deleted! -
@Herve_Smith there is also this option
https://www.youtube.com/watch?v=oQYHFecsTto -
This post is deleted! -
@Herve_Smith not that familiar with a voron but does it have a z endstop stop and a z probe?
-
This post is deleted! -
System has marked this topic as solved
-
This post is deleted! -
@Herve_Smith would you be willing to share your solution?
-
This post is deleted! -
@Herve_Smith very nicely explained and done, thanks!
-
This post is deleted!
