Voron config

[wbrokow1]

Hi , I think I have my speed settings too low on my voron 2.4 .

I use a duet 3 6hc and 3hc. If you could post your config.g files it would be Great.
Thx

[Phaedrux]

How bout you post your config and we can tell you if it's actually too low.

Why do you think it's too low? What are you actually seeing as an issue?

[wbrokow1]

@Phaedrux I am at 12000mm/min

[R4ffers]

@wbrokow1 post your config.g so that people can check and and advise.

[wbrokow1]

@R4ffers config (1).g

[R4ffers]

@wbrokow1 Hi, so I'm currently running these values on my V2.4 350mm :

M566 X500 Y500 Z500 E450
M203 X40000 Y40000 Z3000 E7200
M201 X7000 Y7000 Z350 E2000
M204 P12000 T12000

I use a Rapido, 0.5 nozzle and Lgx lite which work well at these values for me. Double check your slicer settings.