Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Stops dead randomly

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    6
    255
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • bubblevisorundefined
      bubblevisor
      last edited by bubblevisor

      My duet 2 mini 5+ controlled printer has recently developed a problem whereby it stops dead randomly. I have yet to catch it when the failure occurs but it appears as though someone just cut the power momentarily. Could it literally be a fault with the power supply? I have attached a shot of the console that may indicate something. Any ideas?screen.jpg

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @bubblevisor
        last edited by

        @bubblevisor post an output of M122 after the issue occurs. It doesn't have to be right away

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        bubblevisorundefined 1 Reply Last reply Reply Quote 0
        • bubblevisorundefined
          bubblevisor @jay_s_uk
          last edited by bubblevisor

          @jay_s_uk Here is the M122. It has done a few successful prints but just now it stopped just before it started laying the first layer:

          m122
          === Diagnostics ===
          RepRapFirmware for big-dipper version 3.4.0beta5+1 (2021-10-23 18:16:14) running on Duet 3 big-dipper WiFi (standalone mode)
          Board ID: RZAN1-D2401-8D3J0-40188-K3T0Z-7YR20
          Used output buffers: 3 of 40 (12 max)
          === RTOS ===
          Static ram: 102180
          Dynamic ram: 101368 of which 0 recycled
          Never used RAM 38164, free system stack 198 words
          Tasks: NETWORK(ready,15.8%,249) HEAT(notifyWait,0.0%,343) Move(notifyWait,0.0%,338) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,338) TMC(notifyWait,1.2%,114) MAIN(running,82.0%,425) IDLE(ready,0.1%,30) AIN(delaying,0.8%,264), total 100.0%
          Owned mutexes: WiFi(NETWORK)
          === Platform ===
          Last reset 00:04:14 ago, cause: software
          Last software reset at 2023-10-21 16:25, reason: HardFault imprec, Display spinning, available RAM 37884, slot 2
          Software reset code 0x406f HFSR 0x40000000 CFSR 0x00000400 ICSR 0x0047d803 BFAR 0xe000ed38 SP 0x20003f18 Task MAIN Freestk 1066 ok
          Stack: 00000000 200290a8 00000571 00000570 00000348 00076857 00076872 61030000 00000000 00000000 369dc3a0 3edb75d2 3331bb4c 41880000 3e178897 3e1cd04f be09b238 3e3a3fd4 3e639b49 00000000 00000000 412ccccd 3f800000 00000000 60000010 a5a5a5a5 0000000f
          Error status: 0x00
          Aux0 errors 0,0,0
          MCU revision 0, ADC conversions started 254285, completed 254285, timed out 0, errs 0
          Step timer max interval 752
          MCU temperature: min 44.6, current 44.8, max 45.4
          Supply voltage: min 23.9, current 23.9, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes
          Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
          Driver 0: pos 0, standstill, SG min/max 10/10, read errors 0, write errors 1, ifcnt 22, reads 23088, writes 9, timeouts 0, DMA errors 0
          Driver 1: pos 0, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 22, reads 23088, writes 9, timeouts 0, DMA errors 0
          Driver 2: pos 0, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 21, reads 23088, writes 9, timeouts 0, DMA errors 0
          Driver 3: pos 0, standstill, SG min/max 14/14, read errors 0, write errors 1, ifcnt 21, reads 23087, writes 9, timeouts 0, DMA errors 0
          Driver 4: pos 0, standstill, SG min/max 14/14, read errors 0, write errors 1, ifcnt 22, reads 23088, writes 9, timeouts 0, DMA errors 0
          Driver 5: pos 0, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 20, reads 23088, writes 9, timeouts 0, DMA errors 0
          Driver 6: pos 0, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 19, reads 23087, writes 9, timeouts 0, DMA errors 0
          Date/time: 2023-10-21 16:29:37
          Cache data hit count 436204769
          Slowest loop: 2.92ms; fastest: 0.12ms
          === Storage ===
          Free file entries: 10
          SD card 0 detected, interface speed: 22.5MBytes/sec
          SD card longest read time 0.5ms, write time 0.0ms, max retries 0
          === Move ===
          DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
          === MainDDARing ===
          Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
          === AuxDDARing ===
          Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
          === Heat ===
          Bed heaters = 0 -1, chamberHeaters = -1 -1
          Heater 1 is on, I-accum = 0.0
          === GCodes ===
          Segments left: 0
          Movement lock held by null
          HTTP is idle in state(s) 0
          Telnet is idle in state(s) 0
          File is idle in state(s) 0
          USB is idle in state(s) 0
          Aux is idle in state(s) 0
          Trigger is idle in state(s) 0
          Queue is idle in state(s) 0
          LCD is idle in state(s) 0
          Daemon is idle in state(s) 0
          Aux2 is idle in state(s) 0
          Autopause is idle in state(s) 0
          Code queue is empty
          === Filament sensors ===
          Extruder 0 sensor: ok
          === CAN ===
          Messages queued 2288, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 1272/0/0
          Tx timeouts 0,0,1271,0,0,1015 last cancelled message type 30 dest 127
          === Network ===
          Slowest loop: 15.37ms; fastest: 0.00ms
          Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
          HTTP sessions: 1 of 8

          • WiFi -
            Network state is active
            WiFi module is connected to access point
            Failed messages: pending 0, notready 0, noresp 0
            WiFi firmware version 1.25
            WiFi MAC address bc:ff:4dxxxxxxxx
            WiFi Vcc 3.38, reset reason Power up
            WiFi flash size 2097152, free heap 25600
            WiFi IP address 192.168.1.xxx
            WiFi signal strength -64dBm, mode 802.11n, reconnections 0, sleep mode modem
            Clock register 00002002
            Socket states: 0 0 0 0 0 0 0 0
          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @bubblevisor
            last edited by

            @bubblevisor you're running old firmware on 3rd party hardware. Not much we can do to help there.
            I suggest you upgrade the firmware and see how you get on

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            bubblevisorundefined 1 Reply Last reply Reply Quote 0
            • bubblevisorundefined
              bubblevisor @jay_s_uk
              last edited by

              @jay_s_uk I've just been trying to update the firmware. But no matter which .zip firmware I upload the installed version remains at 3.4.0beta.

              jay_s_ukundefined 1 Reply Last reply Reply Quote 0
              • jay_s_ukundefined
                jay_s_uk @bubblevisor
                last edited by

                @bubblevisor maybe bossa the board. Who knows what changes fysetc have made to that beta version

                Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA