Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    STEP file for E3D Tool Changer Z Probe Switch

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    2
    5
    166
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • fcwiltundefined
      fcwilt
      last edited by

      Hi,

      The topic says it all.

      I try to maintain 3D models of everything I own.

      I have the complete E3D Motion System set of models and the E3D Tool Changer set of models but the Z Probe Switch is missing.

      Thanks much

      Frederick

      Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

      Surgikillundefined 1 Reply Last reply Reply Quote 0
      • Surgikillundefined
        Surgikill @fcwilt
        last edited by

        @fcwilt I think I found a model on grabcad. I'll check to see if I have it when I get home.

        fcwiltundefined Surgikillundefined 2 Replies Last reply Reply Quote 0
        • fcwiltundefined
          fcwilt @Surgikill
          last edited by

          @Surgikill said in STEP file for E3D Tool Changer Z Probe Switch:

          @fcwilt I think I found a model on grabcad. I'll check to see if I have it when I get home.

          That would be most appreciated.

          Frederick

          Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

          1 Reply Last reply Reply Quote 0
          • Surgikillundefined
            Surgikill @Surgikill
            last edited by

            @fcwilt D2HW_C201H.STEP

            fcwiltundefined 1 Reply Last reply Reply Quote 0
            • fcwiltundefined
              fcwilt @Surgikill
              last edited by

              @Surgikill said in STEP file for E3D Tool Changer Z Probe Switch:

              @fcwilt D2HW_C201H.STEP

              Thanks much.

              Now my model of the E3D MotionSystem/Tool Changer, as modified and built by me, is complete.

              Frederick

              Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

              1 Reply Last reply Reply Quote 2
              • dc42undefined dc42 marked this topic as a question
              • dc42undefined dc42 has marked this topic as solved
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA