Duet 3 MB 6HC + BIGTREETECH EBB SB2240 CAN

Joel

Hi,

I recently finished my Voron 2.4 R2 build and have it up and running. Still have tweaks to do, but it is printing fine. I Bought the Duet 3 MB 6HC and the 1LC toolboard. I just could not find a clean way to mount the 1LC on the Stealthburner ( extruder + hot end ) so it just went under the chassis and is just driving the extruder stepper, this really just defeated the purpose of using the toolboard.

I noticed that BigTree makes a Stealthburner specific toolboard. Voron is really designed around Klipper. Are these toolboards specific or generic in the way they work? Would the BigTree tool board interface with the Duet 3?

Thanks
Joel

A Former User

This post is deleted!

jay_s_uk

@Joel no, that toolboard won't work with RRF. There is an RRF specific stealthburner toolboard coming but it'll be a couple of months before it's ready

Joel

I think I can wait and see what develops. For now things are still working well.

Thanks

Johno80

@Herve_Smith Hi, I am dealing with the same issue, any chance you would share the models for the StealthBurner with DUET LC board? Thank you

Joel

@jay_s_uk
Hi,

Did the StealthBurner tool board come to fruition?

jay_s_uk

@Joel nope, unfortunately not

dc42

@jay_s_uk it's not stealthburner specific but we've just announced a new smaller tool board, designed to fit the new extruder from E3D. https://www.duet3d.com/Duet3RotoToolboard

Joel

@dc42

I'll take a look