Probe not triggered

P_a3

Hi everyone,

I have a 1 cubic meterprinter with 4 independent lead screw , its been 2 years, and more than 1000 kg of printed plastic since I converted it to Duet.

I'm having issue with G30 & G32 for the first time
I just changed the tool extension board after the previous one shorted on a piece of metal.

The printer home like normal but when i send G32, i get this :
Error: Probe was not triggered during probing move
then:
Error: Compensation or calibration cancelled due to probing errors

I don't think it is the BL touch since homing works fine but I'm no expert haha

config.g
bed.g

Phaedrux

@P_a3 said in Probe not triggered:

Error: Probe was not triggered during probing move

When you run G32 is the bed far out of true such that the bltouch doesn't make contact with the bed? Have you tried starting with a manual leveling to get it close?

Can you send M122 and M98 P"config.g" and share the results?

P_a3

@Phaedrux After about 1h of trying to manually level, I made it work,
the BL touch was touching but not triggering,

way harder to manually level this 1x1x1m printer than my 400x400x400mm hahaha

Thanks