Duet 1HCL Enclosure

[Michael Hathaway]

Assembly for mounting a Duet 3D 1HCL Expansion board in a fan cooled, protected enclosure.

https://www.printables.com/model/684123-duet-1hcl-enclosure

https://www.duet3d.com/duet-3-expansion-1hcl

Space inside the enclosure is provided to be used to universally mount the enclosure to any surface, including extrusion. The bottom of the enclosure is 6mm thick and should be more than adequate enough to mount to. Post printing construction required. M3 insert hardware, etc. Created in commercially licensed Fusion 360/ MatterControl Pro, printed on the Pulse XE.

Thank You to the Duet3D Team for providing us with all these fun toys!

[droftarts]

@Michael-Hathaway Nice! But ... do you mean a 1HCL?!

Ian

[Michael Hathaway]

@droftarts Yes, thank you for that catch. I wasn't consistent throughout my wording. I think I have all of the "1HCL" typos fixed.

[Michael Hathaway]

I have uploaded a new 1HCL enclosure lid. This has recessed hex netting, a little better appearance.