Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Deux5 and 24V fan

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    99
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ObiWan2Printundefined
      ObiWan2Print
      last edited by

      I am using a 115/230Vac, 24Vdc, 14.6A, 350W power supply with Duet 2 wifi board and Deux5 board connected. I want to use the Deux5 board to run a 24V fan. Do I need to solder some jumpers or can I just plug in the fans and run them with the appropriate gcode?

      ObiWan2Printundefined 1 Reply Last reply Reply Quote 0
      • ObiWan2Printundefined
        ObiWan2Print @ObiWan2Print
        last edited by

        @ObiWan2Print I read the information here: https://docs.duet3d.com/User_manual/Connecting_hardware/Fans_connecting

        However, it is not clear if you have to set jumpers for VIN and if this is what is used with 24V fans. Can someone clarify?

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          Have you seen the documentation for the Duex5 itself?

          https://docs.duet3d.com/en/Duet3D_hardware/Duet_2_family/DueX2_and_DueX5#power-jumpers

          If your fans and VIN are both 24v you would jumper the VIN position.

          Place the fan voltage select jumper in the 5V, 12V or VIN position according to your needs

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA