Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Issues with Duet Accelerometer and input shaping

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    2
    4
    152
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • po3plestormundefined
      po3plestorm
      last edited by

      So I just recently went and bought a duet accelerometer to try and do some input shaping,
      Heres the one I got from duet: https://www.duet3d.com/duet3d-accelerometer

      I plugged it into the temp daughter board pins as listed in this page: https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Duet3D_Accelerometer

      The board has a green light and should just be a plug and play solution?

      I added this line into my config, as said in the config settings and have the orientation set correctly to the way I mounted the board.
      M955 P0 I20 C"spi.cs4+spi.cs3" ; configure Accelerometer.

      I then installed the input shaping plugin and its telling me: No Accelerometer found

      I have a duet 2 Wifi with duet web control 3.4.6 and have no idea what I could be doing wrong.
      I saw some things about wiring being a bit tricky so I bought the duet accelerometer to avoid having to do any wiring as I assumed its just plug and play.

      Any Ideas?

      po3plestormundefined 1 Reply Last reply Reply Quote 0
      • po3plestormundefined po3plestorm marked this topic as a question
      • po3plestormundefined
        po3plestorm @po3plestorm
        last edited by po3plestorm

        @po3plestorm

        my bad the config I have for the accelerometer is
        M955 P0 I20 C"spi.cs2+spi.cs1" ; configure Accelerometer.

        as all wires connected to temp DB connector, no temperature daughterboard

        but this still reads no accelerometer.

        oliofundefined 1 Reply Last reply Reply Quote 0
        • oliofundefined
          oliof @po3plestorm
          last edited by

          @po3plestorm update to RRF 3.5rc3 and try again.

          <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

          po3plestormundefined 1 Reply Last reply Reply Quote 1
          • po3plestormundefined
            po3plestorm @oliof
            last edited by

            @oliof well that did it, thanks!\

            heres the link for anyone else with the same issue
            https://github.com/Duet3D/RepRapFirmware/releases

            1 Reply Last reply Reply Quote 1
            • po3plestormundefined po3plestorm has marked this topic as solved
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA