Identifying a legacy board and finding information.
-
I've gotten an older printer that I'm working on fixing up but the board inside appears to be an older board and doesn't seem to match any of the models in the documentation. I was wondering if anyone could help me identify them and find information like the wiring diagram and configuration details.
-
@cythos Did you check https://reprap.org/wiki/Duet ? It looks like to 0.8.5 Version of this board (see the print on your boards upper right side)
Hope it helps! -
@cythos Yes, Duet v0.85. See the wiki link @flaviocu posted. The old config tool can make a set of configuration files for it: https://configtool.reprapfirmware.org/legacy/Start
Ian
-
@flaviocu you're absolutely correct, I don't know how I missed that print but it is the 0.8.5 version. Thanks as well to the link to the reprap wiki, I didn't think they would have the legacy boards there. @droftarts Thanks as well for the link to the old config tool, this is a massive help from both of you.
-
@cythos The current Duet wiki is mostly still compatible with the 0.85, thought there is no hardware information on it. If you update to the last version of RRF for 0.85 (1.26.1, available here https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1), this is largely the same as RRF 2.05.1, which the wiki covers in detail, usually in separate tabs if newer firmware versions have diverged. See https://docs.duet3d.com/
Ian
