Magic Smoke on Tool Board
-
Resolved
-
@Richard-F connecting between gnd and vout the fan will always be on.
You should be connecting between +vout and out1 -
@jay_s_uk thanks jay i will try
-
@Richard-F yes it's working now .. I was sure it was broken .. Thanks so much ,there is definitely a burn small around out1 ,
, but its working
thanks again
-
undefined Phaedrux marked this topic as a question 24 Apr 2024, 21:31
-
undefined Phaedrux marked this topic as a regular topic 24 Apr 2024, 21:31