Duet 3 mini 5+ CAN connection with Bigtree Tech EBB36

[kirill_maker]

Hi! Recently I've got my Duet 3 mini 5+ and want to use it with Bigtree Tech EBB36 tool board through CAN bus - https://github.com/bigtreetech/EBB

The question is - I'm not sure that it's compatible - but why? Maybe someone succeeded with configuration?

Thanks!

[jay_s_uk]

@kirill_maker the EBB36 is not compatible with reprapfirmware.
If you want to run those two together you will have to run klipper

[kirill_maker]

@jay_s_uk That's unfortunate - I've chose Duet because of no need of SBC and fancy interface but with klipper it will be the same like other SBC based MCUs And I can't use roto tool board because I have orbiter extruder and not stealthburner stuff...

I've raised issue on git - maybe one day it will be compatible.. https://github.com/bigtreetech/EBB/issues/129

lordxeorus created this issue 2 Jul 2024, 08:08 in bigtreetech/EBB

closed Add support of RRF #129

[jay_s_uk]

@kirill_maker you have a choice of the following toolboards that are compatible with RRF
Duet3D 1LC
Duet3D Roto
Mellow Fly-RRF36
Mellow Fly-SHT36 Max V3
Mellow Fly-SB2040 Pro V3
Mellow Fly-SB2040 Max Pro V3

[jay_s_uk]

@kirill_maker it will never be compatible as it doesn't support CAN-FD and RRF doesn't use support CAN 2.0 for toolboards as its too slow

[kirill_maker]

@jay_s_uk said in Duet 3 mini 5+ CAN connection with Bigtree Tech EBB36:

@kirill_maker you have a choice of the following toolboards that are compatible with RRF
Duet3D 1LC
Duet3D Roto
Mellow Fly-RRF36
Mellow Fly-SHT36 Max V3
Mellow Fly-SB2040 Pro V3
Mellow Fly-SB2040 Max Pro V3

Thanks! Will try!