Duet 3 Motor 23 CL torque curve

[abraxas]

I am constructing a custom 3D printer. Please provide a

torque curve (torque at different speeds)

for the Duet 3 Motor 23 CL to check if that one is suitable.

https://docs.duet3d.com/en/Duet3D_hardware/Duet_3_family/Duet_3_Motor_23CL

I did not find any via the above link.

[abraxas]

btw: "1,26kg/cm" as a holding torque found via above link is not a valid torque unit

if we assume "1,26kg*cm" at 9,81N/kg is meant, then this value translates to a valid torque of 1,236Nm.

[dc42]

@abraxas here is the torque curve for the 76mm long motor on which the M23CL-76 motors are based, measured at 2A current with 24V power. With 48V power the drop-off will occur at higher speed.

[abraxas]

@dc42 Thank you very much