Help with installing 3.5.3-rc.1 [SBC mode]

mike_b

Hi everyone, I need to test 3.5.3-rc.1 and I've been struggling to find documentation on exactly to update to an rc. Updating firmware seems to be quite straightforward; download all the files from the dropbox and update via M997. However, I'm not sure how to update the rest, DSF, DWC, etc. I assume rc's are not in the unstable repo? I ask because I also tried changing deb source to unstable armv7 but running an update doesn't do anything; i.e. telling me I'm already updated to latest. Thanks in advance!

update 2: could it be that 3.5.3-rc1 is not yet available for aarch64?

update 1: I also ran apt list -a duetwebserver just to see what versions are available and, indeed, I don't see 3.5.3 anywhere:

Listing... Done
duetwebserver/unstable,now 3.5.2 arm64 [installed]
duetwebserver/unstable 3.5.2~rc.1 arm64
duetwebserver/unstable 3.5.1 arm64
duetwebserver/unstable 3.5.0 arm64
duetwebserver/unstable 3.4.6 arm64
duetwebserver/unstable 3.4.6~rc.1 arm64
duetwebserver/unstable 3.4.5 arm64
duetwebserver/unstable 3.4.4 arm64
duetwebserver/unstable 3.4.3 arm64
duetwebserver/unstable 3.4.2 arm64
duetwebserver/unstable 3.4.2~rc3 arm64
duetwebserver/unstable 3.4.2~rc2 arm64
duetwebserver/unstable 3.4.2~rc1 arm64
duetwebserver/unstable 3.4.1 arm64
duetwebserver/unstable 3.4.1~rc2 arm64
duetwebserver/unstable 3.4.1~rc1 arm64
duetwebserver/unstable 3.4.0 arm64

duetwebserver/unstable 3.5.2 armhf
duetwebserver/unstable 3.5.2~rc.1 armhf
duetwebserver/unstable 3.5.1 armhf
duetwebserver/unstable 3.5.0 armhf
duetwebserver/unstable 3.4.6 armhf
duetwebserver/unstable 3.4.6~rc.1 armhf
duetwebserver/unstable 3.4.5 armhf
duetwebserver/unstable 3.4.4 armhf
duetwebserver/unstable 3.4.3 armhf
duetwebserver/unstable 3.4.2 armhf
duetwebserver/unstable 3.4.2~rc3 armhf
duetwebserver/unstable 3.4.2~rc2 armhf
duetwebserver/unstable 3.4.2~rc1 armhf
duetwebserver/unstable 3.4.1 armhf
duetwebserver/unstable 3.4.1~rc2 armhf
duetwebserver/unstable 3.4.1~rc1 armhf
duetwebserver/unstable 3.4.0 armhf

jay_s_uk

@mike_b it'll be one for @chrishamm to comment on

p8blr

@mike_b having the same issue in sbc mode. I wish there were instructions to manually upload firmware in sbc mode, instead of using M997.