Getting error from Cura gcode: Error: Bad command: -1 M110

westech

Greetings!

I sliced from Cura 2.8. It printed fine but the console gave me this error at the start : Error: Bad command: -1 M110.M110 is not in my start or end Gcode. So not sure were in Cura I can turn it off? Any idea what it is trying to do?

Weird, I just did a search of the gcode in GCODE ANALYZER, and M110 can't be found?

Thanks

Max

dc42

@westech is it repeatable if you start printing the same file again?

westech

@dc42 Yes, I printed three versions. Like I said it printed fine. I double checked my start GCODE from Cura and no M110. Not a big deal since it prints. Just curious what Cura was trying to execute that Duet didn't like.

So no worries:-)

jay_s_uk

@westech can you post a sample gcode file?
what firmware version are you running? what board? standalone or SBC?

westech

@jay_s_uk Hi Jay!!! Its a Mellow FLY RRF E3 V1.0 (I have several of you boards:-)

DWC 3.5.2,

STMWIFI 3.3.0_14

Duet Wifi Server 1.26-05S-D

Endcap 96.5 v101.5 1.2mm.gcode

jay_s_uk

@westech wow, the version of your firmware is old. you should also avoid mismatching the version of the firmware and DWC.
I would suggest you upgrade to the latest stable
https://teamgloomy.github.io/fly_e3_upgrading_3_5.html

westech

@jay_s_uk Thanks will do.