Moved Print head and probe - Need to recalibrate
-
I've made some modifications to my print head which changed the location of the nozzle and BL TouchProbe. I know there was a place in Config to tell it where the probe and nozzle are but I don't recall. Can someone please point me in the direction of what I need to do. Thank you
-
@resh G31 in your config.g
-
@jay_s_uk got it, thank you
-
@resh for setting the probe offsets, see https://docs.duet3d.com/en/User_manual/Connecting_hardware/Z_probe_testing#calibrate-the-z-probe-trigger-height
Ian
